How to Get a Minolta Dimage Z 1 to Read a Memory Card Capacity

Dimage X - Unable to use SD carte

Dimage X - Unable to use SD menu

I am getting the fault "Unable to employ card" when I plug in a new Sandisk 128 MB SD card for the Minolta Dimage X. I have followed the instructions to format the memory but it still shows the error. Does anyone have any ideas what might be wrong. Thanks.

Re: Dimage X - Unable to utilize SD card

maybe write protection is enabled?

Siew Chuah wrote:

I am getting the error "Unable to utilise carte du jour" when I plug in a new
Sandisk 128 MB SD card for the Minolta Dimage X. I have followed
the instructions to format the retentivity merely it yet shows the error.
Does anyone have any ideas what might be wrong. Thanks.

Re: Dimage X - Unable to use SD bill of fare

Dr. Konrad, thanks for the suggestion. I checked and the write protection notch is in the aforementioned position as the 8MB SD which came with the camera so I believe it is not enabled.

Dr.Konrad wrote:
maybe write protection is enabled?

Siew Chuah wrote:

I am getting the error "Unable to utilize card" when I plug in a new
Sandisk 128 MB SD card for the Minolta Dimage X. I have followed
the instructions to format the memory merely it still shows the error.
Does anyone have any ideas what might be wrong. Thanks.

Re: Dimage X - Unable to use SD card

Is it possiible that Dimage X is not compatible with 128 KB. Is there a limit as to how much memory you lot can pump into these gadgets.

Dr.Konrad wrote:
maybe write protection is enabled?

Siew Chuah wrote:

I am getting the error "Unable to apply bill of fare" when I plug in a new
Sandisk 128 MB SD carte du jour for the Minolta Dimage X. I have followed
the instructions to format the memory but it nevertheless shows the error.
Does anyone have any ideas what might be incorrect. Thanks.

Re: Dimage X - Unable to apply SD bill of fare

Fatih Oz wrote:

Is information technology possiible that Dimage 10 is not compatible with 128 KB. Is
in that location a limit as to how much memory you can pump into these gadgets.

I bought a SanDisk 128 MB for my 10 a few weeks ago, information technology works fine.

  • Rich

Re: Dimage X - Unable to utilize SD carte

Siew Chuah wrote:

I am getting the error "Unable to apply menu" when I plug in a new
Sandisk 128 MB SD menu for the Minolta Dimage X. I have followed
the instructions to format the retention but it still shows the error.
Does anyone take any ideas what might be wrong. Cheers.

Windows XP formats past default with FAT32 and you need simply"Fatty" for flashcard, Try to reformatt and change FAT32 to FAT.
Bill

Re: Dimage X - Unable to utilise SD card

Bill Hulsey wrote:

Siew Chuah wrote:

I am getting the error "Unable to use card" when I plug in a new
Sandisk 128 MB SD card for the Minolta Dimage Ten. I accept followed
the instructions to format the memory but it even so shows the mistake.
Does anyone accept any ideas what might be wrong. Cheers.

Windows XP formats past default with FAT32 and you need simply"Fatty" for
flashcard, Effort to reformatt and change FAT32 to FAT.
Bill

It should be formatted in the photographic camera.

Re: Dimage X - Unable to use SD card

I had same problem and my camera would not format the card until I used the card reader to format information technology first with FAT, not FAT32.
Bill

Rick C wrote:

Bill Hulsey wrote:

Siew Chuah wrote:

I am getting the error "Unable to use card" when I plug in a new
Sandisk 128 MB SD card for the Minolta Dimage X. I have followed
the instructions to format the memory simply information technology yet shows the error.
Does anyone have any ideas what might be incorrect. Thank you.

Windows XP formats past default with FAT32 and you need just"FAT" for
flashcard, Try to reformatt and change FAT32 to FAT.
Bill

It should be formatted in the camera.

Re: Dimage Ten - Unable to use SD card

Thanks everyone for your replies. I had a bad memory card. I finally went back to the shop to have the retentivity exchanged and now information technology works.

Siew

Bill Hulsey wrote:
I had same problem and my camera would non format the card until I
used the card reader to format it first with Fatty, not FAT32.
Nib

Rick C wrote:

Bill Hulsey wrote:

Siew Chuah wrote:

I am getting the error "Unable to utilise card" when I plug in a new
Sandisk 128 MB SD card for the Minolta Dimage X. I have followed
the instructions to format the retentivity but it still shows the error.
Does anyone accept any ideas what might be wrong. Thanks.

Windows XP formats by default with FAT32 and you need just"FAT" for
flashcard, Endeavor to reformatt and modify FAT32 to Fat.
Bill

It should be formatted in the camera.

Raven70 • New Fellow member • Posts: one

Re: Dimage 10 - Unable to use SD carte du jour

1

what you need is a program called SDFormatter, SD uses a very specific format this will reformat your disk to that format, then when yous put information technology in your camera goto setup, and format the disk for the minolta, and whala! problem solved!

http://download.cnet.com/SD-Formatter/3000-2094_4-75883295.html

thats where I got it and it saved me! its a gratuitous dl too

BigGG • Contributing Fellow member • Posts: 931

Re: Dimage X - Unable to use SD menu

This is a 13 year old thread

Sony SLT-A77 Sony Alpha a99 Panasonic Lumix DMC-GX8 Sony a77 2 Sigma 35mm F1.iv DG HSM Art +43 more

tsklau • New Member • Posts: one

Re: Dimage 10 - Unable to apply SD card

Siew Chuah wrote:

I am getting the error "Unable to use card" when I plug in a new Sandisk 128 MB SD card for the Minolta Dimage X. I have followed the instructions to format the retention simply it still shows the error. Does anyone have whatever ideas what might exist incorrect. Thank you.

The strange things, I had been using a 512MB SD card for a while now and it is fine. However some of the software features on the photographic camera 'disappeared', so suggestion anyone !? /// Tsk

neilt3

neilt3 • Senior Fellow member • Posts: 2,335

Re: Dimage X - Unable to use SD menu

tsklau wrote:

Siew Chuah wrote:

I am getting the mistake "Unable to employ card" when I plug in a new Sandisk 128 MB SD card for the Minolta Dimage X. I have followed the instructions to format the memory but it still shows the error. Does anyone have whatever ideas what might exist wrong. Thanks.

The strange things, I had been using a 512MB SD card for a while at present and information technology is fine. All the same some of the software features on the camera 'disappeared', and then proposition anyone !? /// Tsk

I can't answer your question , simply seeing equally though you've hidden information technology in a 17 yr old thread on a card non working in a camera , your unlikely to get any helpful response as whatsoever is the issue it'southward now't to do with the SD carte .

.

Start a new thread with a title relevant to the trouble your having and someone might spot it that tin can help .

Konica Minolta DiMAGE A200 Konica Minolta DiMAGE A2 Minolta DiMAGE 7 Konica Minolta DiMAGE Z5 Minolta DiMAGE 7Hi +63 more than

Keyboard shortcuts:

F Forum Thousand My threads

hagerquamblus.blogspot.com

Source: https://www.dpreview.com/forums/thread/246596

0 Response to "How to Get a Minolta Dimage Z 1 to Read a Memory Card Capacity"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel